3 Ways To Fix a Toilet That Keeps Flushing

3/30/2022 (Permalink)

Toilets that are not connected to flushometers may keep running for different reasons.

Three Ways To Fix Toilet Overflow

Commercial toilets run the risk of problems that may cause continued flushing. The underlying cause of this problem may be determined by the setup of the bathroom facilities at a building in Baldwin, WI. Here are three ways to fix toilet overflow problems and reduce the added cost and risk of a toilet flood associated with this plumbing issue.

1. Fix the Flushometer

A commercial structure may rely on a flushometer to eliminate waste from toilets or urinals. These systems are either manual or automatic. If facilities equipped with this technology start running continuously, it may be necessary to clean or replace the gasket of a manual flushometer or the diaphragm kit of an automatic model.

2. Check the Internal Components

Toilets that are not connected to flushometers may keep running for different reasons. A flapper may not seal properly and could require replacement or fill tube adjustments. A fill valve leak might also be the cause of the problem. These repairs are relatively easy for amateurs to complete, but a building owner or manager can also schedule expert repair and water damage restoration.

3. Call a Plumber

If the owner or manager of a commercial building cannot stop a toilet, it is time to contact a plumber. Repairs should ideally take place prior to a toilet overflow. If a facility has already become flooded, shut off the water supply and try to extract as much standing water as possible with a mop or wet-dry vacuum.
Whether the bathrooms in a commercial building are equipped with flushometers or have standard designs, these measures can stop water from continuously running through a toilet and reduce the risk of a toilet overflow. These fixes may be done by the owner or manager of a building in Baldwin, WI, or it may be worthwhile to rely on a plumber to prevent water damage.